No.8 Silicone Masterflash 178-330mm (7 to 13 inch) - High Temp.
Suitable for profiled sheeting and flat panel surfaces with external pipe
diameters of (7 to 13 inch) / 178 to 330mm.
APPLICATION
Suitable for profiled sheeting and flat panel
surfaces and is temperature resistance -74°C to 260°C
CONSTRUCTION
Made of SILICONE, these flashings are
componded specifically for maximum resistance to weathering due to ozone and
ultraviolet light.
Fast, one piece construction allows for easy on-site
installation in usually 5 minutes.
The base is designed to form a seal on
most panel configurations and roof pitches regardless of pipe location.
INSTALLATION
1. Choose pipe opening and trim using a
stanley knife or scissors.
2. Slide flashing over pipe (you may need to
lubricate the flashing with some grease).
3. Form the flashing to the same
profile as the roof.
4. Apply sealant (contained in the Fixing Kit).
5.
Fasten using the screws and caps (supplied in the Fixing Kit).
TWO Standard Fixing Kits are required to install this
flashing.