Proline - Black Fire Basket - Ø39x31cm PET



In additon to being useful for firewood, they are decorative and functional. This makes the felt baskets ideal for storing magazines, newspapers or childrens toys.

PET firewood baskets are made from recycled bottles.

Mi-Flexwrap 10m Kit (10m Blanket, 20 Bands, 12m Tape) 180mm or 200mm



10m Kit of Mi-FlueWrap blanket suitable for insulating Flue Liner from 180mm up to 200mm diameter. The kit comprises of 10m of blanket, 20 securing bands and 12m of aluminium tape.

APPLICATION
Mi-FlueWrap is used to insulate Flue Liner and thus reduces the possibility of condensation in the flue. Usually installed in large open chimneys or when the chimney is situated in an open aspect, and is subject to harsh weather conditions.

CONSTRUCTION
Mi-FlueWrap is manufactured from non-combustible material and is suitable for continuous operating temperatures of up to 550° C.
Blanket thickness is 12mm which allows it flex around bends.
Comes in two diameters, one suitable for diameter up to 150mm and the other suitable up to 200mm. Mi-FleWrap can easily be trimmed using a stanley knife.

INSTALLATION
We recommend sealing all joints using 50mm wide Aluminium Tape. Wrap the flue liner in one complete length of Mi-FlueWrap, now tape the edges together with aluminium foil tape. Secure with the Aluminium Bands every 500mm. Now the Flue Liner is ready to be installed.
The blanket can be cut using a stanley knife.

7 inch Flue Liner - Rain Cap




Provides rain protection at the top of the stack.

APPLICATION
Provides rain protection at the top of the stack.

INSTALLATION
Terminal slides over the top of the liner and can be screwed into place with self tapping screws (not supplied) or alternatively can be cemented in to place at the top of the stack.
MAINTENANCE
It is recommended that chimneys serving solid fuel appliances be swept and maintained as frequently as necessary but at least once a year.

Proline - Brown Fire Basket - Ø39x31cm Faux Leather



Elegant firewood basket in imitated leather. The white seams gives a constrast to the leather, and provides the basket with an eye catching look. In additon to being useful for firewood, they are decorative and functional. This makes the baskets ideal for storing magazines, newspapers or childrens toys.

Increasing Flue Adaptor 125 Rigid to 150 Flex



A metal connector which connects the flexible chimney liner (one diameter size bigger - ie. 6 inch (150mm)) to single wall pipe at the base of the stack.

APPLICATION
Connects 150mm (6 inch) Flue Liner to 125mm (5 inch) Black Pipe / Vitreous Enamel / 1mm Stainless / Single Wall flue at the bottom of the chimney stack.
HETAS recommend that if you are burning wood then you should increase the size of the flue liner by 25mm from the appliances spigot size.
This is due to the amount of condensates that can be produced from burning unseasoned wood.

CONSTRUCTION
Made from 316 grade stainless steel, it has integral drain hole to let the condensates flow back into the flue.

INSTALLATION - CHECK LIST
1.Make sure the liner will go down the chimney (this can be done by pulling down a small section of the diameter liner you will be using)
2.Sweep your chimney.
3.Check you pot is in good condition, if you are NOT using a suspended cowl then remove the pot from the stack.

INSTALLATION
Flue Liner should always be fitted from the top.
Make sure the arrows are pointing upwards (gas flow).
Secure a piece of string (at least the same length as the Flue Liner to the Nose Cone (order separately).
Now attach the Nose Cone onto the end of the Flue Liner, again making sure the arrows on the Flue Liner are pointing away from the Nose Cone in a upward direction so when the liner is installed the arrows will be pointing to the top of the chimney
Pull the liner down the chimney using the string and at the same time have someone at the top of the chimney feeding the Flue Liner down, once the Flue Liner is fitted remove the Nose Cone.

MAINTENANCE
It is recommended that chimneys serving solid fuel appliances be swept and maintained as frequently as necessary but at least once a year.

Asgard 7 SK - DEFRA Black



DEFRA Approved Stoves for Smoke Controlled Stove Areas
Smoke-Controlled Stoves are DEFRA approved for use in smoke exempt urban, town and city zones.

An effective and functional convection stove covered with decorative soapstone, which gives a beautiful contrast to the black surfaces. Soapstone has a special ability to absorb and maintain heat.

Fire Rope - per metre 12mm Ø



Glass fibre woven Stove Rope is suitable for stoves and is supplied by the metre.

APPLICATION
Fire Rope is suitable for doors and lids on solid fuel stoves and boilers

CONSTRUCTION
Fire Rope is manufactered from woven glass fibres.

INSTALLATION
Clean away any old rope and remove and loose metal from the locating channel. Apply Fire Rope Adhesive following instructions on the container. Press Fire Rope firmly into channel, then cut Fire Rope with scissors to finish with an end to end butt joint. Allow fifteen minutes before closing doors.

Register Plate (K) - 180/200mm Hole 900mm x 600mm - 2 Access Holes




Register Plates are used to seal off the base of the chimney.
This Register Plate is 900mm x 600mm
It has TWO access holes.
It is suitable for 180mm and 200mm (7 and 8 inch) Black Stove Pipe.
DO NOT USE THIS REGISTER PLATE IF YOU ARE USING VERMICULITE TO INSULATE YOUR FLUE.

APPLICATIONUse to seal off the base of the chimney (This Register Plate can be cut on site to fit the base size of your chimney stack). The Register Plate will support vermiculite and stop any debris from within the chimney stack coming down the chimney and hitting your stove.

CONSTRUCTIONThe Register Plate and the Supporting Brackets are made from 1.5mm thick galvanised steel. The Register Plate can be sprayed to match the colour of your stove pipe. This Register Plate has a special adapter suitable for installations which use either 180mm or 200mm diameter flue pipes.

INSTALLATIONThe four supporting brackets should be cut to the length and width of the base of your chimney stack. Drill a number of holes in the brackets. Now screw them into the brickwork. Cut the Register Plate to the correct size, taking care that the pipe hole lies vertically above the Black Stove Pipe. Drop the Register Plate onto the supporting brackets. Now seal any gaps between the brickwork and the brackets / plate using Fire Cement or High Temperature Sealant. For 150mm diameter installations simply remove the centre cover ring by unscrewing the two retaining screws.

MAINTENANCEIt is recommended that chimneys serving solid fuel appliances be swept and maintained as frequently as necessary but at least once a year. At the same time remove the Register Plates inspection hole cover plate(s) and hoover / sweep any debris that has fallen.
DO NOT REMOVE COVER PLATES IF VERMICULITE HAS BEEN INSTALLED AS ADDED INSULATION.

POD Five - 9 kW Stove



The Pod Five has a steel body giving a maximum of 13kw of heat with a nominal output of 9kw. A contemporary design with a large ceramic glass window gives an excellent view of the fire, the stove also has a convenient log storage space under the fire box the stove is available in matt grey. Internally it’s fully lined with firebricks.

The Pod Five is certified to BS EN13240 and comes with a 2 year warranty.

Proline - Black Fire Basket - Ø39x31cm PET



In additon to being useful for firewood, they are decorative and functional. This makes the felt baskets ideal for storing magazines, newspapers or childrens toys.

PET firewood baskets are made from recycled bottles.

Adjustable Register Plate - 125mm Hole 900mm x 495mm - 2 Access Holes




Register Plates are used to seal off the base of the chimney.
This Register Plate is ADJUSTABLE by 80mm from front to back. Its overall size is 900mm x 495mm
It has TWO access holes.
It is suitable for 125mm (5 inch) Black Stove Pipe.
DO NOT USE THIS REGISTER PLATE IF YOU ARE USING VERMICULITE TO INSULATE YOUR FLUE.
 

APPLICATION
Use to seal off the base of the chimney (This Register Plate can be cut on site to fit the base size of your chimney stack). The Register Plate will support vermiculite and stop any debris from within the chimney stack coming down the chimney and hitting your stove.

CONSTRUCTION
The Register Plate and the Supporting Brackets are made from 1.5mm thick galvanised steel. The Register Plate can be sprayed to match the colour of your stove pipe. This Register Plate has a special adapter suitable for installations which use either 125mm or 150mm diameter flue pipes.

INSTALLATION
The four supporting brackets should be cut to the length and width of the base of your chimney stack. Drill a number of holes in the brackets. Now screw them into the brickwork. Cut the Register Plate to the correct size, taking care that the pipe hole lies vertically above the Black Stove Pipe. Drop the Register Plate onto the supporting brackets. Now seal any gaps between the brickwork and the brackets / plate using Fire Cement or High Temperature Sealant. For 150mm diameter installations simply remove the centre cover ring by unscrewing the two retaining screws.

MAINTENANCE
It is recommended that chimneys serving solid fuel appliances be swept and maintained as frequently as necessary but at least once a year. At the same time remove the Register Plates inspection hole cover plate(s) and hoover / sweep any debris that has fallen.
DO NOT REMOVE COVER PLATES IF VERMICULITE HAS BEEN INSTALLED AS ADDED INSULATION.

Quattro-PLUS Flue Liner 316L Grade - Solid Fuel 125mm (5 inch)



Multi fuel flexible liner made from 316L grade stainless steel - 10 year manufacturers warranty with this product

WARRANTY
316L Grade Flue Liner is warranted for 10 years (conditions apply)

APPLICATION
A double skinned flexible flue liner suitable for relining within a masonry chimney. Flue liner is suitable for use with burning gas, oil, coal, coke, cured dry logs, cured dry peat.
If the appliance is mainly going to be used to burn wood, and the appliance is not DEFRA approved you should increase the diameter of the Flue Liner to 150mm (providing this will fit in the masonry chimney), as recommended by Building Regulations.

CONSTRUCTION
The flue liner has a smooth inner liner made from 316L grade stainless steel and is 0.12mm thick. The flue liner has a convoluted outer skin made from 316L stainless steel and is 0.12mm thick. The Flue Liner is constructed from a single strip of steel which is bent at 180 degrees and then the seam is folded in four planes to give a quattrolock seal.

APPROVAL
Flue Liner is approved and listed by HETAS

INSTALLATION - CHECK LIST
1.Make sure the liner will go down the chimney (this can be done by pulling down a small section of the diameter liner you will be using)
2.Sweep your chimney.
3.Check you pot is in good condition, if you are NOT using a suspended cowl then remove the pot from the stack.

INSTALLATION
Flue Liner should always be fitted from the top.
Make sure the arrows are pointing upwards (gas flow).
Secure a piece of string (at least the same length as the Flue Liner to the Nose Cone (order separately).
Now attach the Nose Cone onto the end of the Flue Liner, again making sure the arrows on the Flue Liner are pointing away from the Nose Cone in a upward direction so when the liner is installed the arrows will be pointing to the top of the chimney
Pull the liner down the chimney using the string and at the same time have someone at the top of the chimney feeding the Flue Liner down, once the Flue Liner is fitted remove the Nose Cone.

MAINTENANCE
It is recommended that chimneys serving solid fuel appliances be swept and maintained as frequently as necessary but at least once a year.

ULISSE Log Trolley




This carriage has been designed for logs which are a maximum of 500mm long.
It is equiped with a stainless steel handle and a 3mm thick steel body.
The rear wheels have a diameter of 150mm.
The revolving front wheels allow the trolley to be manourvered easily.
All four wheels are made from grey rubber that will protect delicate flooring.
It is powder coated in an opaque black colour.
Self assembly.

RES 2 Lead Base 175-275mm (7-11 inch) - Low Temp.

Suitable for tiled roofs with external pipe diameters of 7inch to 12inch (175mm to 300mm), the maluble LEAD base size is 27inch x 27inch. APPLICATIONSuitable for tiled roofs and is temperature resistance -55°C to 135°C CONSTRUCTIONThe EPDM rubber upstand has a 20 year life. The built in 20° pitch allows adaptability to almost any roof pitch including 45°. The pull tab design and easy smooth tear grooving is intended to eliminate cutting by knife and allow for a circular hole. INSTALLATION1. Pull tab design to correct size using pliers, alternatively cut using a stanley knife. 2.Apply silicone sealant to back of flashing. 3.Remove tiles around pipe and slide flashing over pipe. 4. Fasten Flashing to the roof. 5. Cut tile to fit tp the top of the Flashing allowing the bottom of the flashing metal base to sit on top of the tiles.

POD Twelve - 7 kW Stove



The Pod Twelve has a steel body giving a maximum of 10kw of heat with a nominal output of 7kw. A contemporary design with a large ceramic curved glass front giving an excellent view of the fire, the stove is beautifully styled. The stove has a log store under the fire chamber. The stove is available in matt brown. Internally it’s fully lined with firebricks.

The Pod Twelve is certified to BS EN13240 and comes with a 2 year warranty.

ULISSE Log Trolley



This carriage has been designed for logs which are a maximum of 500mm long.
It is equiped with a stainless steel handle and a 3mm thick steel body.
The rear wheels have a diameter of 150mm.
The revolving front wheels allow the trolley to be manourvered easily.
All four wheels are made from grey rubber that will protect delicate flooring.
It is powder coated in an opaque black colour.
Self assembly.

Quattro-PLUS Flue Liner 904L Grade - Solid Fuel 250mm (10 inch)



Multi fuel flexible liner made from 904L grade stainless steel on both the inner and outer walls - 25 year manufacturers warranty with this product

 

WARRANTY
904L Grade Flue Liner is warranted for 20 years (conditions apply)

APPLICATION
A double skinned flexible flue liner suitable for relining within a masonry chimney. Flue liner is suitable for use with burning gas, oil, coal, coke, cured dry logs, cured dry peat, smokeless fuels.

CONSTRUCTION
The flue liner has a smooth inner liner made from 904L grade stainless steel and is 0.12mm thick. The flue liner has a convoluted outer skin made from 904L stainless steel and is 0.12mm thick. The Flue Liner is constructed from a single strip of steel which is bent at 180 degrees and then the seam is folded in four planes to give a quattrolock seal.

APPROVAL
Flue Liner is approved and listed by HETAS

INSTALLATION - CHECK LIST
1.Make sure the liner will go down the chimney (this can be done by pulling down a small section of the diameter liner you will be using)
2.Sweep your chimney.
3.Check you pot is in good condition, if you are NOT using a suspended cowl then remove the pot from the stack.

INSTALLATION
Flue Liner should always be fitted from the top.
Make sure the arrows are pointing upwards (gas flow).
Secure a piece of string (at least the same length as the Flue Liner to the Nose Cone (order separately).
Now attach the Nose Cone onto the end of the Flue Liner, again making sure the arrows on the Flue Liner are pointing away from the Nose Cone in a upward direction so when the liner is installed the arrows will be pointing to the top of the chimney
Pull the liner down the chimney using the string and at the same time have someone at the top of the chimney feeding the Flue Liner down, once the Flue Liner is fitted remove the Nose Cone.

MAINTENANCE
It is recommended that chimneys serving solid fuel appliances be swept and maintained as frequently as necessary but at least once a year.

Proline - Black Fire Basket - Ø39x31cm. PET.



In additon to being useful for firewood, they are decorative and functional. This makes the felt baskets ideal for storing magazines, newspapers or childrens toys.

PET firewood baskets are made from recycled bottles.

No.8 Silicone Masterflash 178-330mm (7 to 13 inch) - High Temp.



Suitable for profiled sheeting and flat panel surfaces with external pipe diameters of (7 to 13 inch) / 178 to 330mm.

 

APPLICATION
Suitable for profiled sheeting and flat panel surfaces and is temperature resistance -74°C to 260°C

CONSTRUCTION
Made of SILICONE, these flashings are componded specifically for maximum resistance to weathering due to ozone and ultraviolet light.
Fast, one piece construction allows for easy on-site installation in usually 5 minutes.
The base is designed to form a seal on most panel configurations and roof pitches regardless of pipe location.

INSTALLATION
1. Choose pipe opening and trim using a stanley knife or scissors.
2. Slide flashing over pipe (you may need to lubricate the flashing with some grease).
3. Form the flashing to the same profile as the roof.
4. Apply sealant (contained in the Fixing Kit).
5. Fasten using the screws and caps (supplied in the Fixing Kit).

TWO Standard Fixing Kits are required to install this flashing.

POD Four - 7 kW Stove 



The Pod Four has a steel body giving a maximum of 11kw of heat with a nominal output of 7kw. A contemporary design with a large ceramic glass window gives an excellent view of the fire and a warming shelf, the stove also has a convenient log storage space under the fire box the stove is available in matt grey. Internally it’s fully lined with firebricks.

The Pod Four is certified to BS EN13240 and comes with a 2 year warranty.

Proline - Green Fire Basket - Ø39x31cm. Felt.

The highly decorative firewood baskets in enduring felt are available in red, green and grey. In addition to being useful for firewood, they are decorative and functional. This makes the felt baskets ideal for storing, e.g. magazines/newspapers or childrens toys.

Top Insert Sleeve



The top insert sleeve slides inside the flexible chimney liner at the top of the installation and is used together in conjunction with the Top Plate and Top Clamp, this will support the weight of the liner at the top of the stack.

Fire Rope - per metre 8mm Ø



Glass fibre woven Stove Rope is suitable for stoves and is supplied by the metre.

APPLICATIONFire Rope is suitable for doors and lids on solid fuel stoves and boilers

CONSTRUCTIONFire Rope is manufactered from woven glass fibres.

INSTALLATIONClean away any old rope and remove and loose metal from the locating channel. Apply Fire Rope Adhesive following instructions on the container. Press Fire Rope firmly into channel, then cut Fire Rope with scissors to finish with an end to end butt joint. Allow fifteen minutes before closing doors.

Proline - Black Fire Basket - Ø39x31cm. PET.



In additon to being useful for firewood, they are decorative and functional. This makes the felt baskets ideal for storing magazines, newspapers or childrens toys.

PET firewood baskets are made from recycled bottles.

Proline Companion Set 2 Black



Aduro Proline 2 is designed by Aduros own designers, Casper Storm and Torben Madsen. They describe their thoughts behind the product in the following way:

From the initial design, the intention was to make a wood container/felt basket where the design was in line with the mode of expression that characterises Aduros wood-burning stoves - minimalist and simple Scandinavian expression. As a reocurring design element, the products have a central vertical slit which splits the main shape and leaves an opening in the front. In doing so, a depth effect is achieved – the product appears to have several layers. For Aduro Proline 2 for example, you can sense the tools behind the shield.

Chimney-Liner - 150mm (6 inch) Increasing Flue Adaptor 125 Rigid to 150 Flex

 

 

A metal connector which connects the flexible chimney liner (one diameter size bigger - ie. 6 inch (150mm)) to single wall pipe at the base of the stack.

APPLICATION
Connects 150mm (6 inch) Flue Liner to 125mm (5 inch) Black Pipe / Vitreous Enamel / 1mm Stainless / Single Wall flue at the bottom of the chimney stack.
HETAS recommend that if you are burning wood then you should increase the size of the flue liner by 25mm from the appliances spigot size.
This is due to the amount of condensates that can be produced from burning unseasoned wood.
 

CONSTRUCTION
Made from 316 grade stainless steel, it has integral drain hole to let the condensates flow back into the flue.
 

INSTALLATION - CHECK LIST
1.Make sure the liner will go down the chimney (this can be done by pulling down a small section of the diameter liner you will be using)
2.Sweep your chimney.
3.Check you pot is in good condition, if you are NOT using a suspended cowl then remove the pot from the stack.

INSTALLATION
Flue Liner should always be fitted from the top.
Make sure the arrows are pointing upwards (gas flow).
Secure a piece of string (at least the same length as the Flue Liner to the Nose Cone (order separately).
Now attach the Nose Cone onto the end of the Flue Liner, again making sure the arrows on the Flue Liner are pointing away from the Nose Cone in a upward direction so when the liner is installed the arrows will be pointing to the top of the chimney
Pull the liner down the chimney using the string and at the same time have someone at the top of the chimney feeding the Flue Liner down, once the Flue Liner is fitted remove the Nose Cone.

MAINTENANCE
It is recommended that chimneys serving solid fuel appliances be swept and maintained as frequently as necessary but at least once a year.

After Care Products Stove Thermometer



SAVE MONEY WITH A STOVE THERMOMETER Ensure your stove is operating at the correct temperature by using this magnetic stove thermometer that attaches to your black stove pipe.
If your stove is too cold then creosote deposits will form, if its too hot then you are wasting energy.

CONSTRUCTION
The Stove Thermometer is 2.5 inch Diameter (63mm). Its magnetic so attaches just above your stove on the Black Stove Pipe.

INSTALLATION
The stove thermometer attaches magnetically, directly to the metal flue pipe. Optimal location is at eye level, no less than 300mm (12 inches) above the top of the stove, where you can easily see it in the room.

Chimney (All Fuels) 5 inch Gas Cowl Ø 130



The Gas Cowl fits to the top of the flue system to stop any water coming down the flue. The protective shroud stops prevailing winds from effecting the flue. Ideal for use on gas installations.

A Locking Band is required to secure this part.

APPLICATION
For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler, condensing boilers and any solid fuel appliances.

CONSTRUCTION
Outer skin is made from 304 grade stainless steel and is 0.5mm thick. Inner skin is made from 316 grade stainless steel and is 0.5mm thick. Insulation is compressed rockwool which is injected into the flue giving a density of 180kg/m³. All parts are fully welded – making DT suitable for condensing appliances.
Distance to combustibles is 50mm.

APPROVALS
DT is HETAS Approved and is CE marked.

Designation Number is EN1856-1 T600 N1 D V2 L50050 G50.

INSTALLATION
DT Twin Wall Insulated Chimney has a simple twist fit joint system, this is then secured by using a Locking Band - the simplest and strongest construction system on the market today.
Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board). This distance is only for DT, other flues on the market may have distance of 60mm or more (this is because of the quality of the product) – please ask your supplier.

Aduro Easy Fire Starters tubes of 100


For safe and easy ignition of barbeques and wood stoves without any odours. Perfect for use in the home, when camping or hiking.

Place 2-3 firestarters between the logs or coal and light the corner of each sealed firestarter - the foil packaging will act as wick. The firestarters will burn for 7-10 minutes without giving off smoke or odours.
Unlimited durability.
Keep out of the reach of children.

Quattro-PLUS Flue Liner 904L Grade - Solid Fuel 180mm (7 inch)



Multi fuel flexible liner made from 904L grade stainless steel on both the inner and outer walls - 20 year manufacturers warranty with this product

WARRANTY
904L Grade Flue Liner is warranted for 20 years (conditions apply)

APPLICATION
A double skinned flexible flue liner suitable for relining within a masonry chimney. Flue liner is suitable for use with burning gas, oil, coal, coke, cured dry logs, cured dry peat, smokeless fuels.

CONSTRUCTION
The flue liner has a smooth inner liner made from 904L grade stainless steel and is 0.12mm thick. The flue liner has a convoluted outer skin made from 904L stainless steel and is 0.12mm thick. The Flue Liner is constructed from a single strip of steel which is bent at 180 degrees and then the seam is folded in four planes to give a quattrolock seal.

APPROVAL
Flue Liner is approved and listed by HETAS

INSTALLATION - CHECK LIST
1.Make sure the liner will go down the chimney (this can be done by pulling down a small section of the diameter liner you will be using)
2.Sweep your chimney.
3.Check you pot is in good condition, if you are NOT using a suspended cowl then remove the pot from the stack.

INSTALLATION
Flue Liner should always be fitted from the top.
Make sure the arrows are pointing upwards (gas flow).
Secure a piece of string (at least the same length as the Flue Liner to the Nose Cone (order separately).
Now attach the Nose Cone onto the end of the Flue Liner, again making sure the arrows on the Flue Liner are pointing away from the Nose Cone in a upward direction so when the liner is installed the arrows will be pointing to the top of the chimney
Pull the liner down the chimney using the string and at the same time have someone at the top of the chimney feeding the Flue Liner down, once the Flue Liner is fitted remove the Nose Cone.

MAINTENANCE
It is recommended that chimneys serving solid fuel appliances be swept and maintained as frequently as necessary but at least once a year.

Wall Support Plate and 2 Support Brackets


The Wall Support Plate with Straight Pipe and 2 Wall Support Brackets is used at the base of an external stack to support the weight of the chimney.

APPLICATION
For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler, condensing boilers and any solid fuel appliances.

CONSTRUCTION
Outer skin is made from 304 grade stainless steel and is 0.5mm thick. Inner skin is made from 316 grade stainless steel and is 0.5mm thick. Insulation is compressed rockwool which is injected into the flue giving a density of 180kg/m³. All parts are fully welded – making DT suitable for condensing appliances.
Distance to combustibles is 50mm.

APPROVALS
DT is HETAS Approved and is CE marked.

Designation Number is EN1856-1 T600 N1 D V2 L50050 G50.

INSTALLATION
DT Twin Wall Insulated Chimney has a simple twist fit joint system, this is then secured by using a Locking Band - the simplest and strongest construction system on the market today.
Make sure that you keep a distance of 50mm from the outside of the flue to any combustible material (wood, plaster board). This distance is only for DT, other flues on the market may have distance of 60mm or more (this is because of the quality of the product) – please ask your supplier.

POD Eight - 7 kW



The Pod Eight has a steel body giving a maximum of 10kw of heat with a nominal output of 7kw. A contemporary design with a large ceramic glass front and side windows giving an excellent view of the fire from three sides, the stove also has a convenient log storage space under the fire box. The stove is available in matt black. Internally it’s fully lined with firebricks.

The Pod Eight is certified to BS EN13240 and comes with a 2 year warranty.

Gloss Black Enamel Pipe 90° Elbow with Door

 

90° elbow measured from the vertical - with access door for sweeping. This should only be used as the first piece when installing from the rear of an appliance.
 

APPLICATION
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C.
Stove pipe should only be used as a connecting pipe between your appliance and Flue Liner / Chimney Stack / Twin Wall Flue System.
Black stove pipe should NOT be used to pass through ceilings or wall.

CONSTRUCTION
Black stove pipe is a single skin flue system manufactured in zero carbon steel with vitreous enamel coating in a matt black finish.
Suitable for gas, oil and solid fuel appliances with temperatures up to 750 degrees C

INSTALLATION
You should not install a piece of Vitreous Enamel Stove Pipe within 3 times the diameter of the flue from combustible material, e.g. wood, plaster boards, etc.
A 5 inch (125mm) diameter piece of Vitreous Enamel Stove Pipe should be 15 inches (375mm) away from combustible materials.
When installing make sure Vitreous Enamel Stove Pipe is installed the correct way up - the smaller diameter should always be pointing downward.
This is because all the condensates will stay within the flue system and not pass to the outside of Vitreous Enamel Stove Pipe.
Each joint should be coated with a jointing compound (fire cement or high temperature silicone sealant).This makes sure that no condensate can escape and spoil the appearance of the pipe.

MAINTENANCE
You should make provision for inspecting and cleaning the chimney. This is particularly important on solid fuel applications.
You can acheive this by installing a Vitreous Enamel pipe with an access door.
It is recommended that chimneys serving solid fuel appliances be swept and maintained as frequently as necessary but at least once a year.

POD One - 5 kW


The Pod One is a multi-fuel stove with an efficient dual layer steel body convection system giving a maximum of 9kw of radiant heat with a nominal output of 6kw. A contemporary design with a large ceramic glass window gives an excellent view of the fire, the stove is available in matt grey. Internally it’s fully lined with firebricks.

The Pod One is certified to BS EN13240 and comes with a 2 year warranty.

Proline Briquette Bucket 42x21x18cm



Metal briquette basket with handles, sprayed in a black colour.
Have room for one bag of briquettes and is a practical and highly decorative solution for your briquettes.

Design: Casper Storm and Torben Madsen.

Baseline - Brown Fire Basket - 55x45x30cm Faux Leather.



Elegant firewood basket in imitated leather. The white seams gives a constrast to the leather, and provides the basket with an eye catching look. In additon to being useful for firewood, they are decorative and functional. This makes the baskets ideal for storing magazines, newspapers or childrens toys.

Baseline Companion Set 2 Faux Leather. Black


Aduro Baseline 2 companion set is as elegant as it is practical. The four tools; broom, shovel, poker with log roller and a tong, are discretely hidden behind a curved shield in imitated leather.

Measures: Height: 63.5cm, Width: 30cm, Depth: 18cm

MAXI Silicone Masterflash 330-660mm (13 to 26 inch) - High Temp.

 

Suitable for profiled sheeting and flat panel surfaces with external pipe diameters of (13 to 26 inch) / 330 to 660mm.

APPLICATION
Suitable for profiled sheeting and flat panel surfaces and is temperature resistance -74°C to 260°C

CONSTRUCTION
Made of SILICONE, these flashings are componded specifically for maximum resistance to weathering due to ozone and ultraviolet light.
Fast, one piece construction allows for easy on-site installation in usually 5 minutes.
The base is designed to form a seal on most panel configurations and roof pitches regardless of pipe location.

INSTALLATION
1. Choose pipe opening and trim using a stanley knife or scissors.
2. Slide flashing over pipe (you may need to lubricate the flashing with some grease).
3. Form the flashing to the same profile as the roof.
4. Apply sealant (contained in the Fixing Kit).
5. Fasten using the screws and caps (supplied in the Fixing Kit).