50mm(2 inch) wide, 50 metres long aluminium tape with a temperature range from -10 degrees centigrade to 100 degrees centigrade
Thursday, 20 December 2012
Aluminium Tape
Aluminium Tape :
50mm(2 inch) wide, 50 metres long aluminium tape with a temperature range from -10 degrees centigrade to 100 degrees centigrade
50mm(2 inch) wide, 50 metres long aluminium tape with a temperature range from -10 degrees centigrade to 100 degrees centigrade
Rockwool Tube - 1000mm long 125mm
Rockwool Tube - 1000mm long 125mm :
Rockwool Tube - 1000mm long 125mm
125mm x 1000mm length of Rockwool Tube for insulating Flue Liner.
Rockwool Tubes are used to insulate Flue Liner and thus reduces the possibility of condensation in the flue. Usually installed in large open chimneys or when the chimney is situated in an open aspect, and is subject to harsh weather conditions.
Rockwool Tubes are manufactured from non-combustible rock wool. Rockwool Tubes do not sustain vermin and will not encourage growth of fungi, mould or bacteria and is suitable for continuous operating temperatures of up to 500° C.
Pipe thickness is 25mm (1 inch) and lengths are 1000mm (39 inches).
Comes in three diameters for the following liner sizes:
140mm (to suit 125mm ( 5 inch )),
169mm ( to suit 150mm ( 6 inch )),
219mm ( to suit 200mm ( 8 inch )).
The 219mm diameter can easily be trimmed to fit 175mm (7 inch) chimney liner.
Rockwool Tube - 1000mm long 125mm
125mm x 1000mm length of Rockwool Tube for insulating Flue Liner.
Rockwool Tubes are used to insulate Flue Liner and thus reduces the possibility of condensation in the flue. Usually installed in large open chimneys or when the chimney is situated in an open aspect, and is subject to harsh weather conditions.
Rockwool Tubes are manufactured from non-combustible rock wool. Rockwool Tubes do not sustain vermin and will not encourage growth of fungi, mould or bacteria and is suitable for continuous operating temperatures of up to 500° C.
Pipe thickness is 25mm (1 inch) and lengths are 1000mm (39 inches).
Comes in three diameters for the following liner sizes:
140mm (to suit 125mm ( 5 inch )),
169mm ( to suit 150mm ( 6 inch )),
219mm ( to suit 200mm ( 8 inch )).
The 219mm diameter can easily be trimmed to fit 175mm (7 inch) chimney liner.
Vermiculite (100L Bag)
Vermiculite (100L Bag) :
The insulating properties of vermiculite significantly reduces the heat loss in cold weather and keeps the interior cool in hot weather. For insulating solid fuel and wood burning liners, it reduces the amount of condensates by keeping the flue warm, it also holds the liner rigid to aid sweeping.
The insulating properties of vermiculite significantly reduces the heat loss in cold weather and keeps the interior cool in hot weather. For insulating solid fuel and wood burning liners, it reduces the amount of condensates by keeping the flue warm, it also holds the liner rigid to aid sweeping.
Honeywell SF450EN Carbon Monoxide Alarm
Honeywell SF450EN Carbon Monoxide Alarm :
The SF450EN is an easy to use and reliable self-contained Carbon Monoxide alarm. Designed for use in all domestic environments such as homes, caravans and boats. Batteries supplied and pre-fitted in alarm.
IT IS NOW PART OF UK BUILDING REGULATIONS FROM 1st OCTOBER 2010 THAT A (CO) ALARM IS FITTED IN TO A DWELLING WHERE A NEW OR REPLACEMENT FIXED SOLID FUEL APPLIANCE IS INSTALLED. ( Document J ) Building Regs 2010
The SF450EN has a 6 Year Guarantee
The SF450EN has a superior electrochemical cell sensing technology Automatic sensor adjustment function ensures complete accuracy. The SF450EN is approved to EN50291:2001
The SF450EN is an easy to use and reliable self-contained Carbon Monoxide alarm. Designed for use in all domestic environments such as homes, caravans and boats. Batteries supplied and pre-fitted in alarm.
IT IS NOW PART OF UK BUILDING REGULATIONS FROM 1st OCTOBER 2010 THAT A (CO) ALARM IS FITTED IN TO A DWELLING WHERE A NEW OR REPLACEMENT FIXED SOLID FUEL APPLIANCE IS INSTALLED. ( Document J ) Building Regs 2010
The SF450EN has a 6 Year Guarantee
The SF450EN has a superior electrochemical cell sensing technology Automatic sensor adjustment function ensures complete accuracy. The SF450EN is approved to EN50291:2001
Chimney Notice Plate
Chimney Notice Plate
Chimney Notice plates are a Building Regulations requirement. They most be filled out and fixed near to the appliance or within a meter cupboard.
Chimney Notice plates are a Building Regulations requirement. They most be filled out and fixed near to the appliance or within a meter cupboard.
Register Plate (H) - No Holes 900mm x 600mm
Register Plate (H) - No Holes 900mm x 600mm :
Register Plates are used to seal off the base of the chimney. This Register Plate is 900mm x 600mm
USE THIS REGISTER PLATE WHEN VERMICULITE IS TO BE USED TO INSULATE THE FLUE.
Use to seal off the base of the chimney (This Register Plate can be cut on site to fit the base size of your chimney stack). The Register Plate will support vermiculite and stop any debris from within the chimney stack coming down the chimney and hitting your stove.
The Register Plate and the Supporting Brackets are made from 1.5mm thick galvanised steel. The Register Plate can be sprayed to match the colour of your stove pipe
Register Plates are used to seal off the base of the chimney. This Register Plate is 900mm x 600mm
USE THIS REGISTER PLATE WHEN VERMICULITE IS TO BE USED TO INSULATE THE FLUE.
Use to seal off the base of the chimney (This Register Plate can be cut on site to fit the base size of your chimney stack). The Register Plate will support vermiculite and stop any debris from within the chimney stack coming down the chimney and hitting your stove.
The Register Plate and the Supporting Brackets are made from 1.5mm thick galvanised steel. The Register Plate can be sprayed to match the colour of your stove pipe
Increasing Adapter 100 Rigid to 125 Flex
Increasing Adapter 100 Rigid to 125 Flex :
The Increasing Adapter is a metal connector which connects the flexible chimney liner (one diameter size bigger - ie. 5 inch (125mm)) to single wall pipe at the base of the stack.
Connects 125mm (5 inch) Flue Liner to 100mm (4 inch) Black Pipe / Vitreous Enamel / 1mm Stainless / Single Wall flue at the bottom of the chimney stack.
HETAS recommend that if you are burning wood then you should increase the size of the flue liner by 25mm from the appliances spigot size. This is due to the amount of condensates that can be produced from burning unseasoned wood.
Made from 316 grade stainless steel, it has integral drain hole to let the condensates flow back into the flue.
The Increasing Adapter is a metal connector which connects the flexible chimney liner (one diameter size bigger - ie. 5 inch (125mm)) to single wall pipe at the base of the stack.
Connects 125mm (5 inch) Flue Liner to 100mm (4 inch) Black Pipe / Vitreous Enamel / 1mm Stainless / Single Wall flue at the bottom of the chimney stack.
HETAS recommend that if you are burning wood then you should increase the size of the flue liner by 25mm from the appliances spigot size. This is due to the amount of condensates that can be produced from burning unseasoned wood.
Made from 316 grade stainless steel, it has integral drain hole to let the condensates flow back into the flue.
Top clamp
Top clamp
Used in conjunction with the Top Plate and Top Insert Sleeve, this will support the weight of the liner at the top of the stack.
Used in conjunction with the Top Plate and Top Insert Sleeve, the Top Clamp supports the weight of the flue liner at the top of the stack.
The galvanised steel plate measure 15 inch square (375mm).
Used in conjunction with the Top Plate and Top Insert Sleeve, this will support the weight of the liner at the top of the stack.
Used in conjunction with the Top Plate and Top Insert Sleeve, the Top Clamp supports the weight of the flue liner at the top of the stack.
The galvanised steel plate measure 15 inch square (375mm).
Top Plate
Top Plate :
The plate measure 15 inch square (375mm) and is used in conjunction with the Top Clamp and Top Insert Sleeve, this will support the weight of the liner at the top of the stack.
Used in conjunction with the Top Clamp and Top Insert Sleeve, the Top Plate supports the weight of the flue liner at the top of the stack.
The galvanised steel plate measure 15 inch square (375mm).
The plate measure 15 inch square (375mm) and is used in conjunction with the Top Clamp and Top Insert Sleeve, this will support the weight of the liner at the top of the stack.
Used in conjunction with the Top Clamp and Top Insert Sleeve, the Top Plate supports the weight of the flue liner at the top of the stack.
The galvanised steel plate measure 15 inch square (375mm).
SS Flue Liner 904L/904L Grade - Solid Fuel 100mm (4 inch)
SS Flue Liner 904L/904L Grade - Solid Fuel 100mm (4 inch) :
Multi fuel flexible liner made from 904L grade stainless steel on both the inner and outer walls - 20 year manufacturers warranty with this product.
A double skinned flexible flue liner suitable for relining within a masonry chimney. Flue liner is suitable for use with burning gas, oil, coal, coke, cured dry logs, cured dry peat, smokeless fuels.
The flue liner has a smooth inner liner made from 904L grade stainless steel and is 0.12mm thick. The flue liner has a convoluted outer skin made from 904L stainless steel and is 0.12mm thick. The Flue Liner is constructed from a single strip of steel which is bent at 180 degrees and then the seam is folded in four planes to give a quattrolock seal.
Multi fuel flexible liner made from 904L grade stainless steel on both the inner and outer walls - 20 year manufacturers warranty with this product.
A double skinned flexible flue liner suitable for relining within a masonry chimney. Flue liner is suitable for use with burning gas, oil, coal, coke, cured dry logs, cured dry peat, smokeless fuels.
The flue liner has a smooth inner liner made from 904L grade stainless steel and is 0.12mm thick. The flue liner has a convoluted outer skin made from 904L stainless steel and is 0.12mm thick. The Flue Liner is constructed from a single strip of steel which is bent at 180 degrees and then the seam is folded in four planes to give a quattrolock seal.
SS Flue Liner 316L Grade - Solid Fuel 100mm (4 inch)
SS Flue Liner 316L Grade - Solid Fuel 100mm (4 inch) :
Multi fuel flexible liner made from 316L grade stainless steel - 10 year manufacturers warranty with this product
A double skinned flexible flue liner suitable for relining within a masonry chimney. Flue liner is suitable for use with burning gas, oil, coal, coke, cured dry logs, cured dry peat.
The flue liner has a smooth inner liner made from 316L grade stainless steel and is 0.12mm thick. The flue liner has a convoluted outer skin made from 316L stainless steel and is 0.12mm thick. The Flue Liner is constructed from a single strip of steel which is bent at 180 degrees and then the seam is folded in four planes to give a quattrolock seal.
Flue Liner is approved and listed by HETAS
Multi fuel flexible liner made from 316L grade stainless steel - 10 year manufacturers warranty with this product
A double skinned flexible flue liner suitable for relining within a masonry chimney. Flue liner is suitable for use with burning gas, oil, coal, coke, cured dry logs, cured dry peat.
The flue liner has a smooth inner liner made from 316L grade stainless steel and is 0.12mm thick. The flue liner has a convoluted outer skin made from 316L stainless steel and is 0.12mm thick. The Flue Liner is constructed from a single strip of steel which is bent at 180 degrees and then the seam is folded in four planes to give a quattrolock seal.
Flue Liner is approved and listed by HETAS
Subscribe to:
Comments (Atom)